Standard Equipment: A belt conveyor that breaks from the old belt traditions. The CRUZbelt unique design parameters such as integrated crossmembers, snubber slide brackets and end pulley cams result in minimal field adjustments and belt tracking. A new rolling cam belt take-up integrated into the profile of the channel depth which eliminates separate jack shaft adjustments, 2.5” end pulley that reduces the need for a transition roller for small product and a high quality durable monofilament belt.
Horizontal Slider: A formed slider pan between CRUZchannel frames with welded bed connectors and painted crossmembers make up the frame. Return rollers are 1.9" diameter, with precision bearings and 7/16" hex axles.
Frame: 7-1/2" CRUZchannel (belt low) has 12 ga. formed steel side channels 7-1/2" deep x 1-5/8" flanges bolted-in crossmembers and welded bed connectors. Frames are painted job color.
End Pulleys: 2.5” diameter DOM tubing, 11/16 axle, 6205 sealed bearing.
Drive Bed: 3-phase 60hz In-line high efficiently helical gearmotor with self-aligning rolling cam take-up, Brake motor provided as an option
Maximum OAL: 150’ with standard drive and take-up, 200’ with an auxiliary belt take-up
Belt Types: Belt: Longitudinal rub top monofilament belting used for ECC.
Double Snubber: The double snubber bed will transition the ECC from horizontal conveying to a pitched angle of up to 13 degrees without adding a second belt.
Guardrail: ECC comes with flared or straight guard rail for capturing product.
Supports: The ECC can be floor mounted or ceiling supported using a low profile hanger that eliminates the extended support pipe into operator areas.
Nominal Widths between Frames (BF): 16”, 22”, 28”, 34”, 40” & 46”
Maximum Product Loading: 50 lbs/ft or 75 lbs per product.
Operating Temperature: 35° to 120°F